Categories
- New arrivals
- Products on sale
- Steel for knifemaking [149]
- Carbon steel - tool steel [65]
- 51CrV4 steel [7]
- 75Cr1 Steel (1.2003 - 1075+Cr) [5]
- 80CrV2 Steel (1.2235 - L2) [4]
- 1.2067 (102Cr6) / L3 [1]
- 75Cr1 (1,2003 ) enyhén csavarodott, kovácsolni szükséges [1]
- 80CrV2 (1,2235 - L2) steel, slightly twisted, forging required [1]
- O1 tool steel [10]
- Böhler K110 (D2) [11]
- Sleipner Steel [7]
- Wolfram Special [5]
- 15n20 Steel (75Ni8) [2]
- 1095 (1.1274) [2]
- M1 steel -1.2842-90MnCrV8 [7]
- 1.2767 (X45NiCrMo4) Böhler K600 [1]
- Stainless knifemaking steel [78]
- Damasc steel - ONLY TO ORDER [6]
- Carbon steel - tool steel [65]
- Knife handle materials [228]
- Surface treatment tools [32]
- Screws [27]
- Mosaic pins [29]
- Bolsters [41]
- Tubes and pins [44]
- Brass square bar, closed section, angle profile [16]
- steel folie [1]
- Luiso W61 Antioxidant Protective Paste Liquid [2]
- Blades and knife blanks [80]
- Kitchen knives [5]
- Knife sheath materials [49]
- Knife and folding knife kits [8]
- Tools for knifemaking [22]
- Drill bits [29]
- Circular saw blades [4]
- Lamellar sanding disc 125mm x 22mm [8]
- Abrasive belts 50x1200mm [25]
- Abrasive belts 50x1500mm [17]
- Abrasive belts 50x2000mm [52]
- 50x2500mm csiszolószalag [1]
- Adhesives [1]
- Sharpening [4]
Vote
Recommended products
Visitor counter
0
4
1
0
3
3
0
Partners
Certificate
Products
1.2842 - 90MnCrV8 - M1 (O2) carbon steel 4mm x 55mm x 980mm
Universally usable carbon steel with very good machinability and polishability. Ideal for non-stainless knife blades. Also suitable for forging, eg damask steel.
C: 0.90 Si: 0.25 Mn: 1.95 Cr: 0.35 V: 0.15
Softened
Available final hardness: 61-63 HRC
Heat treatment:
Training at 820 ° C in oil
Tempering at 200 ° C (2x 1 hour)
Write review
Reviews of the product
